Demo website designed by BRNSG. Want a site like this? Get a free mockup. BRNSG demo · Free mockup

Skip to content

Roof replacement in Austin

We tear the old roof off down to the decking, fix what's rotten and install the new one. Shingles take a day or two, metal three to five. Price per square in writing before we start.

Limestone farmhouse in the Austin hills with a new charcoal standing-seam metal roof

Pick your roof

Installed prices for October 2026, tear-off included. A square is 100 sq ft of roof; a 2,000 sq ft one-story home with a two-car garage has about 30.

Roof materials compared
Architectural shinglesClass 4 impact-resistant shinglesStanding-seam metal
Installed price$480 to $590 per square$560 to $690 per square$1,150 to $1,450 per square
30 squares, before permit and disposal$14,400 to $17,700$16,800 to $20,700$34,500 to $43,500
Life in Central Texas20 to 25 years25 to 30 years40+ years
HailGranules knocked off by 1-inch hailRated Class 4 under UL 2218Can dent, rarely leaks
Wind rating110 to 130 mph110 to 130 mphUp to 140 mph with clips
InsuranceStandard premiumDiscount with many Texas insurersDiscount if the panel is rated Class 4
Install time1 day1 day3 to 5 days
Two-story brick and stone home in Round Rock with a new weathered wood architectural shingle roof
Shingle swatches and two standing-seam metal samples on a kitchen table next to a clipboard and a tape measure

What's in every replacement

Tear-off
One layer torn off down to the decking and hauled away the same day.
Decking check
We check every sheet from the deck and the attic. Rotten 4x8 sheets are replaced at $95 each, with photos before and after.
Underlayment
Synthetic underlayment over the whole deck, ice-and-water shield in valleys and around every penetration.
Metal edges
New drip edge on every eave and rake, new pipe boots, step flashing and counter-flashing.
Fastening
Six nails per shingle, the high-wind pattern manufacturers require for their best warranties. Metal panels are 24-gauge steel on concealed clips.
Ventilation
Ridge vent sized to your attic, so the shingles don't bake in August.
Permit
We pull any permit your city requires and schedule the inspection.
Cleanup
Tarps over your plants, magnet sweep of the yard, driveway and curb.
Warranty
10-year workmanship warranty from us, manufacturer warranty registered in your name.

Install day, hour by hour

For a one-story home of about 30 squares in architectural shingles. Metal roofs follow the same order over three to five days.

Two roofers in harnesses nailing new shingles, downtown Austin in the distance
  1. 7:00 am

    Crew arrives, tarps go over your plants, the dumpster trailer parks in the driveway.

  2. 7:30 am

    Tear-off starts on the back slopes, one slope at a time.

  3. 8:30 am to noon

    Decking repairs and underlayment, slope by slope, so the house is never open to the sky.

  4. Noon to 4:00 pm

    Shingles and step flashing go on together. Ridge vent and ridge cap go on last.

  5. 4:30 pm

    Cleanup and magnet sweep of the lawn, driveway and curb.

  6. 5:00 pm

    Final walk with Tomás. Questions and photos before the crew leaves.

Priced separately

We only add these if we find them during the inspection or you ask for them. They're on the estimate before you sign.

Second layer tear-off
$45 per square
Rotten decking
$95 per 4x8 sheet
Skylight replacement
From $850
Seamless gutters
$11 to $14 per foot
Solar panel removal and reset
Quoted with your installer

Paying for it

No deposit until the materials are on your driveway. The balance is due after the final walk. Check, ACH bank transfer or card. Financing available with approved credit through a third-party lender.

See your number first

Three questions give you the range we'd quote today. The inspection and the written estimate are free.

Call now Free estimate